Secto 4220 table lamp is available in natural birch
Secto 4220 table lamp is available in white laminated
Secto 4220 table lamp is available in black laminated
Secto 4220 table lamp is available in walnut veneer

Secto 4220 table lamp:
Stable and friendly

The Secto 4220 table lamp creates a warm ambiance. Place it on a side table or a dresser to highlight your nook.

Colour:

Get it here!

Secto 4220 table lamp 

Secto 4220. Finnish Design Embassy Event. Residence of the Ambassador of Finland. London, UK. Photo by Simon Sadek.

Secto 4220. Private residence. Helsinki, Finland. Photo by Uzi Varon.

Secto 4220. ZLTO.'s-Hertogenbosch office, The Netherlands. Photo by Ellen Swaan

More images of the Secto 4220 table lamp here

Secto 4220 table lamp is available in four colours: birch, walnut, black and white.
Secto 4220 table lamp is 75 cm high and its diameter is 25 cm.

Secto 4220 table lamp

Handmade of PEFC-certified form pressed birch in Finland by highly skilled craftsmen.

Finishing options

Shade Stand Cable
Natural birch Grey Black
White laminated GreyBlack
Black laminated Black Black 
Walnut veneer GreyBlack

Product details

Material Form pressed birch slats, fine textured powder coated steel stand
Dimensions Height 75 cm
Shade Ø 25 cm
Base Ø 28 cm
Weight 3,9 kg
Package 37 × 30 × 76 cm, 6,3 kg
Voltage 220-240VAC 50Hz
Light source E27 base, LED max 20 W. Comes with a LED bulb (Philips CorePro LED bulb, E27, 8 W, 806 lm, adjustable 2700K / 3000K / 4000K / 5000K / 6500K, dimmable, may vary). The use of special bulbs such as halogen, mirror or 12 V bulbs in Secto Design lamps is prohibited, due to overheating. This product is supplied with an example bulb of energy efficiency class F.
Dimming Details
DALI Attachable to DALI systems with a separate DALI-compatible trailing edge (phase cut off) type dimmer. Due to great variation in DALI systems, Secto Design does not supply DALI-dimmers. Please contact your local electrician.
Cable 220 cm, plastic cable, switch on the cable
Classification Ingress Protection IP20, IEC Protection Class II, CE marking
Assembly Separate instructions on the website.
Maintenance Wipe dust regularly. To remove fresh stains wipe with a slightly damp cloth.

Assembly instructions

Step 1Place in the LED bulb by turning it clockwise.
Step 2Place the shade on the frame so that the small hook on the upper tube goes into the small hole in the lower ring of the shade. 
Step 3Ensure that the fixed round disc on the top of the frame is tightly fitted into the hole in the middle of the top of the shade. Finally, screw the round plate back onto the top of the lamp.
Step 4Plug in the lamp cord.

Details

ColourThe colour of the frame depends on the colour of the shade. Black shades come with black frames. Shades in other colours come with gray frames.
Information The top screw holds the round plate on top of the lamp holder. When placing the shade to the frame the top screw should be opened to release the round plate. The shade is placed on the frame so that the fixed round disc on top of the frame is tightly fitted into the hole on top of the shade. The round plate is then screwed back onto the top of the lamp.

Light distribution

Light distribution curve of Secto 4220. Since the luminaire is symmetric the light distribution curve is similar at every C-planes.

Download LDT

 

Mix and match lamps as you like!

See how our lamps look together in different arrangements and create your own eye-catching installation tailored to your interior.

Mix and match lamps

All lamps

Secto 4220 table lamp ›

Loading form