Secto 4236 corner lamp:
A new kind of light
Designed especially for narrow spaces, this true innovation makes the entire interior into a serene whole. Can be installed in both directions.
More images of the Secto 4236 corner lamp here
Handmade of PEFC-certified form pressed birch in Finland by highly skilled craftsmen. The wood provides a soft luminosity for atmosphere and appeal.
Shade | Back plate | Cable |
Natural birch | White | White |
White laminated | White | White |
Black laminated | White | White |
Walnut veneer | White | White |
Material | Form pressed birch slats, powder coated steel back plate |
Dimensions | Height 60 cm Depth 10–19 cm Side 9–18 cm Width 13–26 cm Weight 0,8 kg Package 21 × 21 × 62 cm, 1,5 kg |
Voltage | 220-240VAC 50Hz |
Light source | E14 base, LED max 20 W. Comes with a LED bulb (Airam Pro LED, E14, 6 W, 470 lumen, 3000 K, pure white, dimmable, may vary). The use of special bulbs such as halogen, mirror or 12 V bulbs in Secto Design lamps is prohibited, due to overheating. This product is supplied with an example bulb of energy efficiency class E. |
Dimming | Details |
DALI | Attachable to DALI systems with a separate DALI-compatible trailing edge (phase cut off) type dimmer. Due to great variation in DALI systems, Secto Design does not supply DALI-dimmers. Please contact your local electrician. |
Cable | 240 cm, textile cable, switch on the cable. Also available with direct wall mounting. |
Classification | Ingress Protection IP20, IEC Protection Class II, CE marking |
Installation | Separate instructions on the website. |
Maintenance | Wipe dust regularly. To remove fresh stains wipe with a slightly damp cloth. |
NOTE: This wall light can be placed facing either upwards or downwards.
WARNING: To reduce the risk of strangulation the flexible wiring connected to this luminaire shall be effectively fixed to the wall if the wiring is within arm's reach.
Step 1 | Lift up the lamp body from the package by holding it from the sheltering structure around it. |
Step 2 | Remove the top sheltering element and the bottom part of the package. |
Step 3 | Loosen the top lock screw and remove the wall part from the lamp shade. |
Step 4 | Put the wall part in right place. |
Step 5 | Screw tight all of the screws. |
Step 6 | Place in the light bulb. |
Step 7 | Place in the lamp shade by first pushing it inwards, and then slide it through the rails downwards. |
Step 8 | Place in the top lock screw. |
Step 1 | Lift up the lamp body from the package by holding it from the sheltering structure around it. |
Step 2 | Remove the top sheltering element and the bottom part of the package. |
Step 3 | Loosen the top lock screw and remove the wall part from the lamp shade. |
Step 4 | Put the wall part in right place. Warning: Switch off the electricity in order to avoid electric shocks. Note: Supplementary insulation must be added to the visible section of the supply cords, i.e., up until the junction box. A protective insulating sleeve is provided with the luminaire. |
Step 5 | Screw tight all of the screws. |
Step 6 | Connect the wires: L=brown, N=blue. |
Step 7 | Place in the light bulb. |
Step 8 | Place in the lamp shade by first pushing it inwards, and then slide it through the rails downwards. |
Step 9 | Place in the top lock screw. |
Light distribution curve of Secto 4236. Polar curve of the angular Luminous Intesity distribution at two perpendicular C planes and at C plane with maximum Luminous Intesity.
See how our lamps look together in different arrangements and create your own eye-catching installation tailored to your interior.
Loading form