Secto 4220 table lamp:
Stable and friendly

The Secto 4220 table lamp creates a warm ambiance. Place it on a side table or a dresser to highlight your nook.

Colour:

Get it here!

Secto 4220 table lamp

Secto 4220. Finnish Design Embassy Event. Residence of the Ambassador of Finland. London, UK. Photo by Simon Sadek.

Secto 4220. Private residence. Helsinki, Finland. Photo by Uzi Varon.

Secto 4220. ZLTO.'s-Hertogenbosch office, The Netherlands. Photo by Ellen Swaan

More images of the Secto 4220 table lamp here

Secto 4220 table lamp

Handmade of PEFC-certified form pressed birch in Finland by highly skilled craftsmen.

Material	Form pressed birch slats, fine textured powder coated steel stand
Dimensions	Height 29.5 in Shade Ø 9.8 in Base Ø 11.0 in Weight 8.6 lb Package 14.6 × 11.8 × 29.9 in, 13.9 lb
Voltage	120V 60Hz
Light source	E26 base, LED max 20 W. Bulbs are not included. The use of special bulbs such as halogen, mirror or 12 V bulbs in Secto Design lamps is prohibited, due to overheating.
Cable	7.2 ft, plastic cable, switch on the cable
Classification	Ingress Protection IP20, IEC Protection Class II, ETL/CETL listed
Assembly	Separate instructions on the website.
Maintenance	Wipe dust regularly. To remove fresh stains wipe with a slightly moist cloth.

Step 1	Place in the LED bulb by turning it clockwise.
Step 2	Place the shade on the frame so that the small hook on the upper tube goes into the small hole in the lower ring of the shade.
Step 3	Ensure that the fixed round disc on the top of the frame is tightly fitted into the hole in the middle of the top of the shade. Finally, screw the round plate back onto the top of the lamp.
Step 4	Plug in the lamp cord.

Colour	The colour of the frame depends on the colour of the shade. Black shades come with black frames. Shades in other colours come with gray frames.
Information	The top screw holds the round plate on top of the lamp holder. When placing the shade to the frame the top screw should be opened to release the round plate. The shade is placed on the frame so that the fixed round disc on top of the frame is tightly fitted into the hole on top of the shade. The round plate is then screwed back onto the top of the lamp.

Light distribution curve of Secto 4220. Since the luminaire is symmetric the light distribution curve is similar at every C-planes.