Teelo 8020 table lamp:
Sculptural and refined
A bold table lamp with a sculptural tone. Note the detail in the design of the joints. Designed by architect Seppo Koho, launched in 2016.
More images of the Teelo 8020 table lamp here
Handmade from PEFC-certified form-pressed birch in Finland by highly skilled craftspeople.
Natural birch | White cable | |
Walnut veneer | White cable |
Material | Form-pressed birch slats, powder coated steel stand |
Dimensions | Height 15 in Width 13 in Diameter Ø 4.3 in Weight 2.2 lb Package 16.5 × 15 × 6.3 in, 3.7 lb |
Voltage | 120V 60Hz |
Light source | E26 base, LED max 20 W. Bulbs are not included. The use of special bulbs such as halogen, mirror or 12 V bulbs in Secto Design lamps is prohibited, due to overheating. |
Cable |
7.2 ft, textile cable, switch on the cable |
Classification | Ingress Protection IP20, IEC Protection Class II, ETL/CETL listed |
Maintenance | Wipe dust regularly. To remove fresh stains wipe with a slightly damp cloth. |
WARNING: The cable can only be replaced by the manufacturer or an authorized service agent.
Step 1 | Take out the light bulb from the package. |
Step 2 | Remove the bottom part of the package. |
Step 3 | Lift up the lamp body from the package by holding it from the sheltering structure around it. |
Step 4 | Remove the two top sheltering elements. |
Step 5 | Remove the two remaining sheltering elements. |
Step 6 | Pull out the socket unit inside the lamp body and install the light bulb into the socket. |
Step 7 | Re-install the socket unit into to the lamp body, and plug in the lamp cord. |
WARNING: Don't lift the lamp from the shade, instead always hold it from the lamp body.
Loading form