A captivating statement piece inspired by snow-crowned trees and summery cumulus clouds. Designed by architect Seppo Koho, launched in 2024.
View and download the Kumulo brochure.
Colour:
Get it here!
Kumulo 5200 pendant lamp
Fiskars Village Art & Design Biennale 2024. Fiskars, Finland. Photo by Uzi Varon.
More images of the Kumulo 5200 pendant lamp here
Handmade of PEFC-certified form pressed birch in Finland by highly skilled craftsmen.
| Shade | Cable | Ceiling cup |
| Natural birch | White | White |
| White laminated | White | White |
| Black laminated | Black | Black |
| Walnut veneer | White | White |
| Material | Form pressed birch slats |
| Dimensions | Height 21.3 in Diameter Ø 21.7 in Weight 5.3 lb Package 23.2 × 23.2 × 25.6 in, 11.46 lb |
| Voltage | 120V 50/60Hz |
| Light source | GX53 base, LED max 12 W. Comes with a LED bulb. The use of special bulbs such as halogen, mirror or 12 V bulbs in Secto Design lamps is prohibited, due to overheating. Bulb diameter max 4 in. |
| Cable | 15 ft, textile cable, ceiling plug/connector, ceiling cup |
| Classification | Ingress Protection IP20, IEC Protection Class II, ETL / CETL listed |
| Maintenance | Wipe dust regularly. To remove fresh stains wipe with a slightly damp cloth. |
| Step 1 | Remove the the top elements that locks the sheltering structure. |
| Step 2 | Lift up and remove the top sheltering structure. |
| Step 3 | Lift up the lamp by holding it from the lamp wire. Warning: Don't lift the lamp by the shade. |
This Secto Design pendant uses the patented ceiling suspension by Dezall. Easy and quick to install, enables the ceiling cup to sit perfectly tight against the ceiling.
| Step 1 | Lock the cord in the upper part of the screw, start in the middle. Then insert it into the opening along the thread. Push it down into the bottom of the channel. |
| Step 2 | Insert the screw, plug and remaining cord through the cover from below. Also insert it through the ring if this is to be used. |
| Step 3 | Put the two matching bottom parts together, facing each other, around the cord between the cover and the lamp. Insert the assembled bottom part into the cover by fitting the “wings” into the slots inside the cover. Push it into the cover until fully seated. |
| Step 4 | Hang the screw on the ceiling hook and connect the plug. |
| Step 5 | Move the lamptop upwards towards the screw hanging on the hook. When the screw and the bottom parts’ “nut” have come in contact inside the cover, start screwing the cover clockwise until it reaches the ceiling. |
| Step 6 | The lamptop is now sitting straight to the ceiling. |
| Height | 3.2 in / 3.5 in (with ring) |
| Outer upper | Ø 4.6 in / 4.7 in (with ring) |
| Inner upper | Ø 4.4 in / 4.6 in (with ring) |
| Weight | 0.13 lb / 0.16 lb (with ring) |
| Colour | White or black matt soft lacquer depending on the colour of the pendant. |
| Information | The round ceiling cup includes an additional ring, which enables leading the cable along the ceiling into the ceiling cup. The additional ring can also be used to cover a larger ceiling socket. Any extra length of the cable can be swirled into the ceiling cup when altering the hanging height of the pendant. |
Loading form
