Secto 4210 floor lamp:
Timeless companion
The floor lamp Secto 4210 is a member of the original Secto family. A timeless living room and lobby companion when you are after a cosy light.
More images of the Secto 4210 floor lamp here
Handmade of PEFC-certified form pressed birch in Finland by highly skilled craftsmen.
Shade | Stand | Cable |
Natural birch | Grey | Black |
White laminated | Grey | Black |
Black laminated | Black | Black |
Walnut veneer | Grey | Black |
Material | Form pressed birch slats, fine textured powder coated steel stand |
Dimensions | Height 68.9–72.8 in, adjustable Shade Ø 11.8 in Base Ø 13.4 in Weight 14.8 lb Package 17.7 × 15.4 × 42.1 in, 22.9 lb |
Voltage | 120V 60Hz |
Light source | E26 base, LED max 22 W. Bulbs are not included. The use of special bulbs such as halogen, mirror or 12 V bulbs in Secto Design lamps is prohibited, due to overheating. |
Cable | 7.5 ft, plastic cable, switch on the cable |
Classification | Ingress Protection IP20, IEC Protection Class II, ETL/CETL listed |
Assembly | Separate instructions on the website. |
Maintenance | Wipe dust regularly. To remove fresh stains wipe with a slightly moist cloth. |
Step 1 | Insert the bottom end of the upper steel tube into the lower steel tube. |
Step 2 | Pull down on the cord to tighten. Tighten the black screw on the tube to fasten the cord. |
Step 3 | First, open the top screw on the bulb holder, then remove the round plate at the top. |
Step 4 | Place the shade on the frame so that the small hook on the upper tube goes into the small hole in the lower ring of the shade. Ensure that the fixed round disc on the top of the frame is tightly fitted into the hole in the middle of the top of the shade. Finally, screw the round plate back onto the top of the lamp. |
Colour | The colour of the frame depends on the colour of the shade. Black shades come with black frames. Shades in other colours come with gray frames. |
Information | The top screw holds the round plate on top of the lamp holder. When placing the shade to the frame thetop screw should be opened to release the round plate. The shade is placed on the frame so that the fixed round disc on top of the frame is tightly fitted into the hole on top of the shade. The round plate is then screwed back onto the top of the lamp. The small hook on the frame goes into the small hole in the lower ring of the shade. |
Light distribution curve of Secto 4210. Since the luminaire is symmetric the light distribution curve is similar at every C-planes.
Loading form